Allprocars's Blog

October 24, 2011

AMSOIL New Assembly Lube for Engine Builders

AMSOIL Engine Assembly Lube (EAL) is formulated to cling to engine parts and provide exceptional wear protection, while inhibiting rust and corrosion in newly built or rebuilt four-stroke engines. It is designed to dissolve in oil, helping eliminate oil port clogging and deposit formation.

Package sizes include: Sign up as a Preferred Customer and buy Wholesale!

4-Fl. OZ. Tube
4-Fl. OZ. Tubes (Case of 12)

Clings Tenaciously to Parts
Because building an engine can take from a few days to many months, using an engine assembly lube that clings well to parts for extended periods is critical. AMSOIL Engine Assembly Lube is formulated with a high-viscosity base oil and a unique tackifier for long-lasting, tenacious cling.

Exceptional Wear Protection
During initial startup, engines operate momentarily with little-to-no oil pressure, placing camshaft lobes, lifters, rocker arms, bearings and other critical parts at high risk of wear and failure. In addition to inhibiting wear by clinging to parts, AMSOIL Engine Assembly Lube contains high levels of antiwear additives for further protection.

Inhibits Rust and Corrosion
An engine can sit in a garage partially assembled for long periods, allowing moisture and oxygen to form rust on exposed metal surfaces. AMSOIL Assembly Lube contains rust and corrosion inhibitors that protect engine components during inactivity.

Dissolves in Oil
Grease-based assembly lubes can increase the risk of oil port clogging if the grease is not fully consumed at initial startup, potentially causing engine failure. AMSOIL Engine Assembly Lube is designed to dissolve in oil, helping oil ports remain clean, and helping to eliminate deposit formation under the valve covers and in the oil pan.

Easy and Precise Application
AMSOIL Assembly Lube is packaged in convenient 4-oz. tubes, allowing for cleaner, more precise application compared to other products.

APPLICATIONS
AMSOIL Engine Assembly Lube is recommended for any new or rebuilt four-stroke engine, including racing and performance engines, and should be applied to all areas of the engine susceptible to initial startup wear.

  1. •Tenaciously Clings to Parts
  2. •High in Anti-Wear Additives
  3. •Dissolves in Oil
  4. •Provides Rust & Corrosion Protection
  5. •Recommended for all Four-Stroke Engines, Including High-Performance and Racing Engines

For more information about AMSOIL products go to www.The1stSyntheticoil.com or www.lubedealer.com/SoutheasterLubricants and click on an appropriate heading.  Should you desire to purchase products, call 1-800-777-7094 and use ZO 9792.  Questions send email to allprocars@knology.net

 
 
Advertisements

October 6, 2011

AMSOIL By-Pass Oil Filter Systems Extend Oil Changes

By-pass Oil Filter Mounting Kits
Engineered for Outstanding Oil Filtration Efficiency

Click for larger photo

PRODUCT DESCRIPTION
The Ea By-Pass Oil Filter (EaBP) provides the best possible filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, the AMSOIL Ea By-Pass Filter operates by filtering oil on a “partial-flow” basis. It draws approximately 10 percent of the oil pump’s capacity at any one time and traps the extremely small, wear-causing contaminants that full-flow filters can’t remove. The AMSOIL Ea Bypass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.   Using the AMSOIL By-Pass System is like having an oil change every 10 minutes.  AMSOIL Filters have a 98.7% Absolute Efficiency at 15 microns. 

click to enlarge

 

  Should you desire to purchase this product you can call 1-800-777-7094 and tell the operator you are calling because of ZO 9792.  You can also check out this product and other AMSOIL products at www.The1stSyntheticoil.com   Questions email allprocars@knology.net

Create a free website or blog at WordPress.com.