Allprocars's Blog

August 24, 2016

AMSOIL MOTORCYCLE OIL IS SIMPLY UNMATCHED IN EVERY CATEGORY!

Motorcycles – Be sure and scroll to the bottom and watch the Dyno Video.

Why AMSOIL? | The introduction of the world’s first synthetic motor oil to meet American Petroleum Institute service requirements in 1972 set all-new standards for motor oil quality. AMSOIL synthetic motor oil outperformed conventional petroleum motor oils on all counts. It was clear from the start that this innovative product would play a major role in engine performance and engine life.

That tradition of innovation and technological advancement carries on with AMSOIL Synthetic Motorcycle Oil. It is engineered to withstand the devastating effects of extreme heat. It features exceptional high-temperature film strength for maximum wear protection and delivers excellent wet-clutch performance and transmission protection. AMSOIL Synthetic Motorcycle Oil helps keep your bike operating at peak efficiency for the long-haul.

Read More About AMSOIL

Cruiser

AMSOIL Synthetic Motorcycle Oil provides premium protection for the unique demands of big cruiser bikes, ensuring cool operation and reliable protection and performance, both on the open road and in stop-and-go traffic.

Sport Bikes

AMSOIL synthetic motorcycle lubricants provide the ultimate performance for sport bikes, decreasing performance-robbing friction for maximum horsepower and wear protection.

Touring

AMSOIL Synthetic Motorcycle Oil keeps your bike running smooth and strong on the open road, providing maximum protection, performance and fuel economy.

Dirt

AMSOIL Synthetic Motorcycle Oil is formulated for exceptional protection and performance in hard-driven dirt bikes, keeping you out of the garage and on the trail.

Official Oil
Synthetic Diesel Motor Oil Frequently Asked QuestionsSynthetic Diesel Motor Oil Versus Conventional Motor Oil
Learn how and where you can buy AMSOIL products

Dyno Tested

Dyno Tested

Protection against extreme heat is of the utmost importance in motorcycle applications. The air-cooled V-twin engines used in Harley-Davidson motorcycles can get extremely hot, particularly when idling or traveling at low speeds. If a motorcycle oil cannot withstand hot operating temperatures, its ability to provide adequate engine protection is compromised. AMSOIL Synthetic Motorcycle Oil is formulated to withstand extreme heat conditions beyond the hottest temperatures motorcycles typically experience, providing peace of mind that motorcycles receive outstanding protection and performance no matter how extreme the operating conditions.

Infrared Camera
As temperatures climbed to more than 500°F in the cylinders, an infrared camera revealed the red-hot conditions that assaulted the engine components and oil.
Heat Test Results

Your bike should never get this hot. If it does, AMSOIL has you covered.

Should you desire to purchase AMSOIL Motorcycle Oil you can go to http://www.amsoil.com or http://www.The1stSyntheticoil.com to read about all products and motorcycle oils.  You can call 1-800-777-7094 and tell the operator you are working with ZO 9792.

 

July 4, 2016

AMSOIL ANNOUNCED NEW MOTORCYCLE OIL KIT

New V-Twin Oil Change Kit Coming Aug. 8

Posted: July 1, 2016 – Announcement

Launching Aug. 8 at Sturgis, the new AMSOIL V-Twin Oil Change Kit combines everything needed to perform an AMSOIL oil change on most 1999-2016 Harley-Davidson motorcycles in one convenient package, including:

  • (4) quarts of AMSOIL 20W-50 Synthetic V-Twin Motorcycle Oil (MCV)
  • (1) chrome AMSOIL Ea® Motorcycle Oil Filter (EaOM134C)
  • (1) O-ring

The kit allows Dealers to offer everything bikers need to perform an oil change in one package, simplifying ordering. Check the Dealer Zone Aug. 8 and the August AMSOIL Magazine for full details.

For more information go to http://www.amsoil.com or http://www.The1stSyntheticoil.com. Should you desire to purchase AMSOIL products you can call 1-800-777-7094 and tell the operator you are working with ZO 9792. You can also purchase AMSOIL Motorcycle oil and other AMSOIL Products from Durbin Auto Store in Prattville, Al. PH: 334-365-5210.

moveUpToAmsoil

 

December 24, 2015

Outstanding Motorcycle Chain Protection

AMSOIL Chain Lube

In order to ensure optimum performance and life, motorcycle chains require premium lubrication. New AMSOIL Chain Lube (ACLSC) helps riders avoid the hassles of frequent reapplication and the stresses of worrying about chain durability, enabling them to focus on riding and providing the confidence to keep up with their buddies on the trail or street.

AMSOIL Chain Lube is a dedicated aerosol chain lubricant that provides outstanding wear and corrosion protection for all types of chains and sprockets. It penetrates deep into the pins and bushings of chains and leaves a protective coating that will not fling off or attract dirt, dust, sand or grit.

Outstanding protection against wear and corrosion

  • Helps extend chain life
  • Does not attract dirt
  • Does not fling off
  • Easy application
  • Fast-drying
  • Sprays from any position

Applications
AMSOIL Chain Lube is suitable for all types of chains, including O, X and Z roller chains found in street, off-road and racing motorcycles. It is also excellent for bicycle, agricultural and industrial applications.

For more information about AMSOIL Motorcycle Oils and Lubs go to http://www.amsoil.com or http://www.The1stSyntheticoil.com or http://www.SELubricants.myamsoil.com.  Should you desire to purchase AMSOIL Products at cost or become an AMSOIL Dealer call, 1-800.777.7094 and tell the operator you have been working with ZO 9792. To have your own business or purchase products you can also contact me at desmon@charter.net.

 

April 1, 2015

AMSOIL NOW OFFERS FREE SHIPPING FOR RETAIL ACCOUNTS

moveUpToAmsoilAMSOIL field research indicates that independent retailers are more likely to purchase from suppliers who provide free shipping and delivery within two days. With the AMSOIL network of distribution centers, the vast majority of AMSOIL orders are already delivered within two days. And, since retail accounts don’t qualify for purchase and freight discounts or commissions like Dealers, Preferred Customers and commercial accounts, AMSOIL will help Dealers increase their sales to retailers and installers by extending free shipping to retail accounts effective April 1.

Retail accounts receive free shipping for orders totaling $300 ($400 Canada) or more. If the order total is less than $300, a flat shipping rate of $9.99 ($11.99 Canada) will apply. Accounts that pick up their orders from an AMSOIL distribution center or employ group-ship or freight-collect options receive a 2 percent discount on their order total.

Free shipping is available for retail accounts in the continental U.S. and Canada. It is not available in Alaska or Hawaii at this time. Additional charges may still apply if customers require lift gate, call before delivery or other special services. Interline fees will also still apply for shipping to remote areas of Canada.

For more information about AMSOIL and its Product Line go to http://www.amsoil.com or http://www.The1stSyntheticoil.com.  Should you desire to market the #1 Synthetic Lubricants in America and Canada today, call 1-800-777-7094 give the operator ZO 9792 as a reference.  You can be a Retail On The Shelf Account for FREE, order your own products and never have a sales person call or bother you again.

March 2, 2015

NEW AMSOIL MOTORCYCLE PRODUCTS FOR V-TWIN EXPANDS MOTORCYCLE MARKET

AMSOIL, the leader in Synthetic Lubrication with the BEST Motorcycle Lubrication products in the market place continues to expand this product line giving bikers the finest money can buy to protect their investment.
                           MVP_MVT_Knock
AMSOIL Synthetic V-Twin Transmission Fluid (MVT) and AMSOIL Synthetic V-Twin Primary Fluid (MVP) are purpose-built for bikers who shy away from using a motor oil in their motorcycles’ transmissions or primary chaincases. Their introduction establishes secondary product recommendations in these applications, giving customers more options and helping Dealers reach a previously inaccessible segment of the market. The main recommendation for motorcycle transmissions and primary chaincases remains AMSOIL Synthetic Motorcycle Oil.
For more information on these new products and other AMSOIL Motorcycle Products check them out at: http://www.amsoil.com or http://www.The1stSyntheticoil.com.  Should you desire to purchase these products you can call 1-800-777-7094. Give the operator ZO 9792 in reference to your call as to whom you have been working with for these or any other AMSOIL Products.

AMSOIL OFFERS NEW OUTSTANDING PROTECTION FOR VICTORY AND INDIAN MOTORCYCLES

AMSOIL, the #1 Synthetic Lubrication Company in America and the leading Manufacturer of Motorcycle Oils and Products has introduced their newest Motorcycle Product that now services Victory and Indian Motorcycles.

MVI

New AMSOIL 20W-40 Synthetic V-Twin Motorcycle Oil (MVI) is formulated to provide premium protection for Victory and model-year 2013 and newer Indian motorcycles. It is the only full-synthetic 20W-40 motorcycle oil on the market, presenting riders a premium alternative to Indian- and Victory-branded semi-synthetic oils. Indian and Victory motorcycles incorporate a shared sump, and AMSOIL 20W-40 is formulated to provide outstanding protection for engines and transmissions. It is absolutely shear stable, keeping motorcycles well-protected even in extreme heat conditions.

For information about this product and other AMSOIL Lubrication products go to: http://www.amsoil.com or http://www.The1stSyntheticoil.com.  Should you desire to purchase this product or others call: 1-800-777-7094 and give the operator ZO 9792 for the reason of your call.

January 3, 2015

AMSOIL ADDS NEW SYNTHETIC DIRT BIKE OIL TO INVENTORY

AMSOIL, the leader in Synthetic Lubrication continues to add new products to their inventory providing the BEST products money can buy to protect equipment and give better performance.

ONE SUCH PRODUCT IS THE NEW AMSOIL SYNTHETIC DIRT BIKE OIL.
DB50

New AMSOIL Synthetic 10W-40 (DB40), 10W-50 (DB50) and 10W-60 (DB60) Dirt Bike Oil delivers consistent clutch feel and outstanding gear protection in four-stroke dirt bikes, helping riders maximize their performance on the trail and at the track. It fulfills the demand for dirt-bike-specific motor oil and helps Dealers diversify their businesses.

AMSOIL INC., the premier manufacturer of synthetic motorcycle lubricants, focuses on improving lubricant performance so riders can focus on improving their performance on the trail or the track. That’s why AMSOIL is the Official Oil of Monster Energy Supercross, AMSOIL Arenacross, AMSOIL GNCC and the AMA Amateur Nationals.

Engineered to deliver the performance attributes most requested by on- and off-track dirt bike riders, including consistent clutch feel. Consistent clutch feel is the result of “friction durability,” so whether deep into a race or deep in the woods, riders can feel confident their clutch will perform from start to finish. AMSOILexclusive advanced chemistry provides outstanding engine reliability for worry-free operation under severe conditions.

Delivers Confidence in Clutch Feel
AMSOIL Synthetic Dirt Bike Oil’s superior friction-durability properties help minimize clutch slippage, fade and chatter, giving riders consistent clutch feel during takeoffs or when maneuvering around obstacles on the trail. In an extreme simulated-start test, AMSOIL Synthetic Dirt Bike Oil continued to deliver consistent clutch feel following 32 simulated race starts, while a leading original equipment manufacturer (OEM)-branded oil demonstrated inconsistent clutch-lever action and poor clutch feel after 16 starts. The clutch plates lubricated with AMSOIL Synthetic Dirt Bike Oil remained clean and in good overall condition, while the plates using the OEM oil revealed discoloration and wear. AMSOIL Synthetic Dirt Bike Oil’s superior performance helps instill in riders the confidence that their bikes will perform consistently in all types of riding conditions.

Protects Against Wear
AMSOIL Synthetic Dirt Bike Oil withstands high-rpm operation, extreme heat and mechanical shear. Its synthetic base oils naturally resist viscosity loss and provide a protective film against wear to gears, bearings and pistons. Its anti-wear additives provide an extra measure of protection, promoting long component life to help riders get the most out of their bikes.
•Delivers confidence in clutch feel
•Superior protection against gear, bearing & piston wear
•Maximizes horsepower
•Helps extend clutch life

RACING IS RESEARCH™
AMSOIL Synthetic Dirt Bike Oil underwent extensive on-track testing in the bikes of AMSOIL-sponsored professional riders on the GEICO/AMSOIL/Honda Factory Connection and Team Babbitt’s racing teams. A combination of racer feedback and lab testing allowed AMSOIL to fine-tune AMSOIL Synthetic Dirt Bike Oil for outstanding wear protection and consistent clutch feel – benefits riders demand.

APPLICATIONS
10W-50 Synthetic Dirt Bike Oil: recommended for KTM®, Kawasaki, Yamaha, Suzuki, Husqvarna and other dirt bikes where 10W-50 motorcycle oil is used. Recommended in place of Motorex® Cross Power 4T. JASO MA, API SG, SJ, SH, SL.

SERVICE LIFE
AMSOIL Synthetic Dirt Bike Oil should be changed according to the vehicle manufacturer’s recommendations.

AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit http://www.amsoil.com/warranty.aspx.

HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended applications and according to the recommendations in the Safety Data Sheet (SDS). An SDS is available via the Internet at http://www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Recycle used oil and bottle.

TYPICAL TECHNICAL PROPERTIES
SAE 10W-50 Dirt Bike Oil (DB50)

Kinematic Viscosity @ 100°C, cSt (ASTM D445) 18.1
Kinematic Viscosity @ 40°C, cSt (ASTM D445) 121.9
Viscosity Index (ASTM D2270) 165
Flash Point °C (°F) (ASTM D92) 240 (464)
Flash Point °C (°F) (ASTM D92) 258 (496)
Pour Point °C (°F) (ASTM D97) -38 (-36)
Noack Volatility, % weight loss (g/100g) (ASTM D5800) 5.5
High Temperature/High Shear Viscosity @ 150°C , 1.0 x 106 s-1), cP (ASTM D5481) 4.9

For further information go to http://www.The1stSyntheticoil.com or http://www.amsoil.com. Should you desire to purchase this product, call 1-800-777-7094 and give the Operatior ZO 9792. You can purchase either as a Catalog Customer or become a Dealer or

Preferred Customer and save 25% by purchasing at cost.

February 14, 2014

AMSOIL/EBR MOTORCYCLE PARTNERSHIP OPPORTUNITIES CONTINUE TO GROW

AMSOIL, the #1 Synthetic Lubrication Company in America continues to attract one of the top Motorcycle Builders in the United States in using their unmatched performance Motorcycle Products to bolster the performance of Buell Motorcycle and give owners better performance and longer service life.

AMSOIL has partnered with Erik Buell Racing (EBR) to offer AMSOIL products at their official EBR motorcycle dealerships.  As you may know, Erik Buell chose AMSOIL 20W-50 Synthetic Motorcycle Oil as the factory-fill oil for the engine and transmission of the new EBR 1190RX.

EBR has developed strict servicing guidelines for all EBR dealerships. Therefore, AMSOIL is assigning unprotected EBR dealership accounts to local Dealers who can meet those requirements. A few Dealers have begun contacting EBR dealerships on their own, which is creating confusion for EBR and EBR dealers. Although AMSOIL appreciates Dealers’ entrepreneurial spirit and resourcefulness, Dealers must refrain from contacting EBR. Dealers not assigned to an EBR account should not attempt to contact any EBR dealership or the EBR corporate office. AMSOIL policy prohibits Dealers from contacting the company’s corporate business partners. According to the Marketing Plan Policies (G47A), Part IV, Section B., number 10, “no Dealer may contact any business partner of AMSOIL INC. unless otherwise authorized.”

For more information about AMSOIL Motorcycle Oils and other AMSOIL Products you can go to www.The1stSyntheticoil.com, www.lubedealer.com/Southeasternlubricants or www.amsoil.com. Should you desire to purchase these products you can call 1-800-777-7094 and give the operator ZO 9792 to order and purchase.  You can purchase AMSOIL products at a 25% savings as a Preferred Customer or have your own AMSOIL Business and build a business.

 

March 2, 2012

AMSOIL, THE LEADER IN SYNTHETIC LUBRICATION, ANNOUNCES NEW COST SAVING PRODUCTS

AMSOIL, the market leader in Syntheic Lubrication, continues to expand their inventory of products all designed to save people downtime and money.  Four new products were released to dealers and the public on March 1 2012.  Those four are listed below. 

AMSOIL Motorcycle Octane Boost (MOB) increases octane up to three numbers for maximum power and efficiency. It is designed to improve startup performance and eliminate engine ping or knock for increased power at low-rpm operation. It contains detergents that help maintain cleanliness of combustion chambers and fuel delivery systems for optimum performance. At the recommended treat rate, it does not harm catalytic converters or oxygen sensors and is compatible with other AMSOIL fuel additives. Motorcycle Octane Boost is available in the U.S. only.

This new product joins the already outstanding motorcycle products of 10W – 30, 10W – 40, 20W – 50 and SAE 60 weight oils, Shock Terapy Suspension Fluid, oil filters, air cleaners, greases and chain lube.  Check out information about this new Motorcycle Boost by copying and pasting the following addy to your browser. http://www.amsoil.com/StoreFront/mob.aspx

AMSOIL Synthetic Multi-Purpose Grease and Synthetic Water-Resistant Grease have been reformulated with calcium sulfonate complex thickeners to provide even better protection and performance. The new thickener allows Synthetic Multi-Purpose Grease and Synthetic Water-Resistant Grease to provide improved extreme-pressure properties, corrosion resistance, oxidation resistance, high-temperature stability and water resistance at the same price as the previous formulations.
 
AMSOIL Synthetic Multi-Purpose Grease and Synthetic Water-Resistant Grease are now available in convenient 3-oz. cartridge sizes (GLC3P, GWR3P), designed for use with the new AMSOIL Grease Gun. The Grease Gun Kit (GLCKT) includes a 3,600 psi spring-loaded grease gun, flexible hose and 3-oz. cartridge of Multi-Purpose Grease.

To see the AMSOIL grease in comparison with other petroleum greases in the “Pound-Out” demonstration copy and paste this addy to your browser: http://www.youtube.com/watch?v=bqvq5IHjHTg

New AMSOIL Ea Heavy-Duty Extended-Life Oil Filters (EaHD) provide excellent filtering efficiency and high contaminant capacity for heavy-duty on- and off-road gasoline and diesel applications. They provide extended service intervals that coincide with the maximum drain intervals of AMSOIL synthetic motor oils.  See the construction and filtering information about these new Heavy-Duty Filters that filter at 98.7 Absolute Efficiency at 20 microns by copying and pasting the following addy to your browser: http://www.amsoil.com/StoreFront/eahd.aspx

For further information about these “New” products and other outstanding cost saving products manufactured by the Superior, Wisconsin based company since 1972 can be found at www.amsoil.com or www.The1stSyntheticoil.com, or www.lubedealer.com/southeasternlubricants.  Should you desire to purchase AMSOIL products you can call 1-800-777.7094. Tell the operator you are calling after information from ZO 9792 and become a Catalog Customer or become a Preferred Customer and purchase at a 25% saving.

October 24, 2011

AMSOIL New Assembly Lube for Engine Builders

AMSOIL Engine Assembly Lube (EAL) is formulated to cling to engine parts and provide exceptional wear protection, while inhibiting rust and corrosion in newly built or rebuilt four-stroke engines. It is designed to dissolve in oil, helping eliminate oil port clogging and deposit formation.

Package sizes include: Sign up as a Preferred Customer and buy Wholesale!

4-Fl. OZ. Tube
4-Fl. OZ. Tubes (Case of 12)

Clings Tenaciously to Parts
Because building an engine can take from a few days to many months, using an engine assembly lube that clings well to parts for extended periods is critical. AMSOIL Engine Assembly Lube is formulated with a high-viscosity base oil and a unique tackifier for long-lasting, tenacious cling.

Exceptional Wear Protection
During initial startup, engines operate momentarily with little-to-no oil pressure, placing camshaft lobes, lifters, rocker arms, bearings and other critical parts at high risk of wear and failure. In addition to inhibiting wear by clinging to parts, AMSOIL Engine Assembly Lube contains high levels of antiwear additives for further protection.

Inhibits Rust and Corrosion
An engine can sit in a garage partially assembled for long periods, allowing moisture and oxygen to form rust on exposed metal surfaces. AMSOIL Assembly Lube contains rust and corrosion inhibitors that protect engine components during inactivity.

Dissolves in Oil
Grease-based assembly lubes can increase the risk of oil port clogging if the grease is not fully consumed at initial startup, potentially causing engine failure. AMSOIL Engine Assembly Lube is designed to dissolve in oil, helping oil ports remain clean, and helping to eliminate deposit formation under the valve covers and in the oil pan.

Easy and Precise Application
AMSOIL Assembly Lube is packaged in convenient 4-oz. tubes, allowing for cleaner, more precise application compared to other products.

APPLICATIONS
AMSOIL Engine Assembly Lube is recommended for any new or rebuilt four-stroke engine, including racing and performance engines, and should be applied to all areas of the engine susceptible to initial startup wear.

  1. •Tenaciously Clings to Parts
  2. •High in Anti-Wear Additives
  3. •Dissolves in Oil
  4. •Provides Rust & Corrosion Protection
  5. •Recommended for all Four-Stroke Engines, Including High-Performance and Racing Engines

For more information about AMSOIL products go to www.The1stSyntheticoil.com or www.lubedealer.com/SoutheasterLubricants and click on an appropriate heading.  Should you desire to purchase products, call 1-800-777-7094 and use ZO 9792.  Questions send email to allprocars@knology.net

 
 
Next Page »

Blog at WordPress.com.